Collet Pads

To Facilitate your ordering, Daco collet pads have the following part number breakdown:

1). Prefix - A four digit series number beginning with "8", i.e., 8008. Designates outer diameters.

2). Middle - A four digit inner diameter bore size measured in decimal inches, i.e., 2.250

3). Suffix - A two letter code designating inner diameter surface style. Codes are as follows:

SM = hard, round, smooth	SQ = hard, square, smooth
ST = hard, round, serrated	ER  = serrated, extended range
HX = hard, hex, smooth	SE = soft emergency

Machine No. & Size	DACO PREFIX NO.	Master Collet No.	Pad No.	Pad Capacity (inches)
#2, #3, #4, #2EC, 16"EC	8009	461-1002 462-1002 1369-1008	461-1003 461-1024 461-1023	RD.1-1/2 HEX 1-/16 SQ.1-1/16
#4- 2" #3 - 1-3/4"	8007	1129-1102 1369-1003	1129-1004 1129-1006 1129-1005	RD.2 HEX 1-3/4 SQ.1-3/8
#5 1A	8008	471-1001	471-1002 471-1004 471-1003	RD.2-1/2 HEX 2-3/16 SQ.1-3/4
1A - 3" 2A - 3-1/2"	8006 (4-split)	404-1008	404-1009 404-1014 404-1028	RD.3-1/4 HEX 2-3/4 SQ.2-3/8
#5 - 3"	8004	4669-1001	4669-1165 4669-1167 4669-1166	RD.3 HEX 2-5/8 SQ.2-1/8
#5 - 4-1/2	8002 (3-split) 8005 (4-split)	2779-1001	2779-1009 2779-1011 2779-1010	RD.4-1/2 HEX 3-7/8 SQ.3-3/16
2A - 4-1/2" 3A - 4-1/2"	8003	533-1008	533-1010 533-1016 533-1011	RD.4-1/2 HEX 3-7/8 SQ.3-3/16
3A - 6"	8001	1959-7	1959-1003 1959-1005 1959-1004	RD.6 HEX 5-3/16 SQ.4-1/2